Piercing ESTRELLA
Piercing ESTRELLA
Piercing ESTRELLA
Piercing ESTRELLA

Piercing ESTRELLA

€23,90 Save €-23,90

4 in stock
  • Piercing en TITANE vendu à l'unité en doré OU argenté
  • Composé d'une pierre de lune et d'un oxyde de zirconium 
  • Diamètre pierre de lune : 0.3 cm
  • Diamètre oxyde de zirconium : 0.2 cm
  • Epaisseur de la tige : 0,12 cm 
  • Longueur de la tige sans fermoir : 0,8 cm 
  • Fermoir vis par la tête du bijou 
  • Embout plat 
  • Hypoallergenic, this jewel is water resistant and does not blacken. 

—> Type de piercing adapté : Helix - Conch - Lobe - Tragus – Anti Helix - Medusa...). Il saura trouver sa place ailleurs sans aucun problème grâce à son embout plat


The rings

 

Method 1: Print the page.

  • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
  • Print this sheet at actual size or choose the 100% scale option. 

Before printing this page, make sure that the indicator below measures 3 cm on each side. 

  • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

 

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required : 

  • Paper strip or ribbon 
  • Pen
  • Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

 

The necklaces 

 

 

Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm

 

 

 

 

 

 

 

 

     

    You'll also like

    Quick overview
    Piercing YELINA
    €11,90
    Quick overview
    Piercing VALENE
    €10,90
    Quick overview
    Piercing NALICIA
    €15,90

    Piercing YELINA

    €11,90 Save €-11,90
    • Piercing vendu à l'unité en acier inoxydable doré OR argenté 
    • Composé d'une brindille ornée d'oxydes de zirconium
    • Dimensions : 0.6 cm X 0.8 cm
    • Longueur de la tige : 0.8 cm 
    • Fermoir à vis 
    • Hypoallergenic, this jewel is water resistant and does not blacken. 

     

    The rings

     

    Method 1: Print the page.

    • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
    • Print this sheet at actual size or choose the 100% scale option. 

    Before printing this page, make sure that the indicator below measures 3 cm on each side. 

    • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

     

    Method 2: Measure your finger circumference

    For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

    Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

    Materials required : 

    • Paper strip or ribbon 
    • Pen
    • Rule

    The steps:

    1. On your strip of paper or tape, put a line for the starting point.
    2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
    3. Mark another line, where your measuring tool overlaps itself.
    4. Measure the distance between the two lines.
    5. 5. Refer to the equivalency table below to find out your finger size.

    There you have it, you have all the information you need to dress your finger with a nice ring! :-)

     

    The necklaces 

     

     

    Short: 40 cm
    Medium: 50 cm
    Short necklace: 60 cm
    Long necklace : 70 or 80 cm

     

     

     

     

     

     

     

     

       

      Piercing YELINA
      Piercing YELINA
      Piercing YELINA
      Piercing YELINA

      Piercing VALENE

      €10,90 Save €-10,90
      • Piercing vendu à l'unité en acier inoxydable doré OR argenté 
      • Demi cercle de feuillage texturé orné d'un cristal 
      • Dimensions : 0.6 cm X 0.8 cm
      • Longueur de la tige : 0.8 cm 
      • Fermoir à vis 
      • Hypoallergenic, this jewel is water resistant and does not blacken. 

       

      The rings

       

      Method 1: Print the page.

      • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
      • Print this sheet at actual size or choose the 100% scale option. 

      Before printing this page, make sure that the indicator below measures 3 cm on each side. 

      • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

       

      Method 2: Measure your finger circumference

      For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

      Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

      Materials required : 

      • Paper strip or ribbon 
      • Pen
      • Rule

      The steps:

      1. On your strip of paper or tape, put a line for the starting point.
      2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
      3. Mark another line, where your measuring tool overlaps itself.
      4. Measure the distance between the two lines.
      5. 5. Refer to the equivalency table below to find out your finger size.

      There you have it, you have all the information you need to dress your finger with a nice ring! :-)

       

      The necklaces 

       

       

      Short: 40 cm
      Medium: 50 cm
      Short necklace: 60 cm
      Long necklace : 70 or 80 cm

       

       

       

       

       

       

       

       

         

        Piercing VALENE
        Piercing VALENE
        Piercing VALENE
        Piercing VALENE

        Piercing NALICIA

        €15,90 Save €-15,90
        • Piercing en TITANE vendu à l'unité en doré OU argenté
        • Composé d'une feuille ornée d'oxydes de zirconium 
        • Dimensions de la feuille : 0,9 cm x 0,5 cm (au plus large)
        • Epaisseur de la tige : 0,12 cm 
        • Longueur de la tige sans fermoir : 0,8 cm 
        • Fermoir vis par la tête du bijou 
        • Embout plat 
        • Hypoallergenic, this jewel is water resistant and does not blacken. 

        —> Type de piercing adapté : Helix - Conch - Lobe - Tragus – Anti Helix - Medusa...). Il saura trouver sa place ailleurs sans aucun problème grâce à son embout plat


        The rings

         

        Method 1: Print the page.

        • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
        • Print this sheet at actual size or choose the 100% scale option. 

        Before printing this page, make sure that the indicator below measures 3 cm on each side. 

        • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

         

        Method 2: Measure your finger circumference

        For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

        Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

        Materials required : 

        • Paper strip or ribbon 
        • Pen
        • Rule

        The steps:

        1. On your strip of paper or tape, put a line for the starting point.
        2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
        3. Mark another line, where your measuring tool overlaps itself.
        4. Measure the distance between the two lines.
        5. 5. Refer to the equivalency table below to find out your finger size.

        There you have it, you have all the information you need to dress your finger with a nice ring! :-)

         

        The necklaces 

         

         

        Short: 40 cm
        Medium: 50 cm
        Short necklace: 60 cm
        Long necklace : 70 or 80 cm

         

         

         

         

         

         

         

         

           

          Piercing NALICIA
          Piercing NALICIA
          Piercing NALICIA
          Piercing NALICIA
          Piercing NALICIA
          Piercing NALICIA
          Retour à Piercings