BAGUES - SOLDÉS – La boutique de Lulu

Bague DORRIE en acier

€13,90 €12,00 Save €1,90

Bague en acier inoxydable
Anneau ouvert composé de trois perles en résine blanche
Anneau ajustable permettant un réglage de la taille 52 à 56
Hauteur de la bague : 1.5 cm
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague VICTORIA

€12,90 €11,00 Save €1,90

Bague en acier inoxydable
Anneau lisse orné d'une étoile embellie d'une pierre naturelle
Ajustable, cette bague se resserre ou s’agrandit de la taille 54 à 58
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague JEROMINE

€13,90 €11,90 Save €2,00

Stainless steel ring, gold or silver plated
Anneau texturé effet deux rangs orné d'une pièce délicatement travaillé embellie d'une pierre naturelle
Ajustable, cette bague se resserre ou s’agrandit de la taille 50 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague KARELLE

€13,90 €11,90 Save €2,00

Stainless steel ring, gold or silver plated
Anneau texturé effet maille orné d'une pièce losange délicatement travaillé embellie d'une pierre naturelle
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague TILDA

€12,90 €11,00 Save €1,90

Gold-plated stainless steel ring
Anneau fin orné d'un oxyde de zirconium
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 58
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague SOELIE

€12,90 €11,00 Save €1,90

Bague en acier inoxydable
Anneau effet deux rangs délicatement travaillé orné d'un médaillon rond gravé d'une fleur en relief
Diamètre médaille : 1 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague BRYNDA

€13,90 €11,90 Save €2,00

Bague en acier inoxydable
Anneau travaillé effet 3 rangs orné d'une navette en résine
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague AURORE

€12,90 €11,00 Save €1,90

Bague en acier inoxydable
Anneau orné d'un médaillon rond gravé d'une étoile et de points en relief
Diamètre médaille : 1,2 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ELWINA

€14,90 €12,90 Save €2,00

Gold-plated stainless steel ring
Anneau fin orné d'un cœur en résine
Dimensions du cœur : 1.2 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague LEANA

€12,90 €9,00 Save €3.90

Stainless steel ring, gold or silver plated
Anneau effet deux rangs orné d'une fleur ajourée et d'une perle noire
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague GUILENE

€14,90 €12,90 Save €2,00

Gold-plated stainless steel ring
Anneau fin orné d'une fleur émaillée au contour délicatement travaillé
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague PERVENCHE

€15,90 €13,90 Save €2,00

Gold-plated stainless steel ring
Anneau fin orné d'une fleur émaillée
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Ring GANIA

€14,90 €12,90 Save €2,00

Gold-plated stainless steel ring
Anneau fin orné d'un cœur en résine
Dimensions du cœur : 1 cm x 1.3 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

LUDIVINE Ring

€15,90 €13,90 Save €2,00

Gold-plated stainless steel ring
Anneau fin orné d'une fleur en résine
Diamètre de la fleur : 1.5 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague OLIVETTE

€13,90 €12,00 Save €1,90

Gold-plated stainless steel ring
Anneau fin orné d'une pièce ovale en résine au contour délicatement travaillé
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague NELYS

€13,90 €11,00 Save €2.90

Stainless steel ring, gold or silver plated
Anneau effet multi-rangs
Hauteur de la bague : 1.7 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague PEROLINE

€12,90 €11,00 Save €1,90

Stainless steel ring, gold or silver plated
Anneau composé de pastilles ovales reliées entre elles
Hauteur de la bague : 1 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague TABATHA

€16,90 €12,90 Save €4,00

Ensemble de 3 bagues en acier inoxydable doré OR argenté
Composé de trois anneaux fins
Anneau ajustable, se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

REKIA ring

€12,90 €11,00 Save €1,90

Gold-plated stainless steel ring
Anneau orné d'un trèfle nacré
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

ADELIA Ring

€13,90 €11,00 Save €2.90

Stainless steel ring, gold or silver plated
Anneau texturé composé de deux anneaux rectangulaires entrelacés
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague DANIKA

€12,90 €11,00 Save €1,90

Gold-plated stainless steel ring
Anneau fin ornée d'oxyde de zirconium
Ajustable, cette bague se resserre ou s’agrandit de la taille 50 à 58
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague HONORA

€16,90 €14,90 Save €2,00

Gold-plated stainless steel ring
Anneau effet deux rangs ornée d'une pierre naturelle ovale et de deux petits cristaux
Hauteur de la bague : 0.9 cm
Epaisseur de l'anneau : 0.7 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 51 à 55
Hypoallergenic, this jewel is water resistant and does not blacken.

Indication : chaque pierre étant unique, la couleur peut varier d’une pierre à l'autre et ne peut pas être identique à celle présente sur la photo

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bag ELYETTE

€17,90 €10,00 Épargnez €7,90

Stainless steel ring, gold or silver plated
Anneau texturé composé d'un losange bombé
Hauteur de la bague : 1.3 cm
Epaisseur de l'anneau : 0.2 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bag BERTILLE

€16,90 €9,00 Épargnez €7,90

Bague en acier inoxydable doré OU argenté
Anneau fin composé d'une fleur ajourée aux pétales courbées
Diamètre : 2.4 cm
Hauteur :
Ajustable, se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm