Thin rings

Bague GAILEEN

€12,90

Gold-plated stainless steel ring
Anneau composé de cauris
Hauteur : 0.5 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 51 à 55
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague MOLLY

€12,90

Gold-plated stainless steel ring
Anneau composé d'étoiles de mer
Hauteur : 0.5 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 50 à 54
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague CLELINE

€12,90

Gold-plated stainless steel ring
Anneau composé d'une pièce ovale ajouré
Dimensions de la pièce : 1 x 1.4 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague NARA

€14,90

Gold-plated stainless steel ring
Anneau effet maille orné d'un oxyde de zirconium
Ajustable, se resserre ou s’agrandit de la taille 51 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague LORELINE

€15,90

Gold-plated stainless steel ring
Anneau effet maille composé d'une pampille ronde
Ajustable, se resserre ou s’agrandit de la taille 52 à 66
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague LORELINE - Personnalisée

€19,90

Gold-plated stainless steel ring
Anneau effet maille orné d'une pampille ronde
Diamètre de la pampille : 0,7 cm
Ajustable, se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.
Indication : tous les bijoux gravés sont livrés dans un écrin

Personnalisation

Indiquer la gravure souhaitée dans l'espace prévu à cet effet ci-dessus.
Possibilité de graver une initiale, un symbole...
Une demande particulière ? Contactez-nous soit par mail : laboutiquedelulu@outlook.com soit par message sur Instagram

Le délai de réalisation pour les personnalisations est de 24h à 3 jours ouvrés

Les bijoux gravés ne sont ni repris, ni échangés

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ALISSONE

€12,90

Gold-plated stainless steel ring
Anneau fin composé de deux feuilles de ginkgo
Hauteur : 1.3 cm
Ajustable, se resserre ou s’agrandit de la taille 52 à 58
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague BRIELLA

€12,90

Gold-plated stainless steel ring
Anneau fin texturé composé d'une fleur
Diamètre de la fleur : 1 cm
Ajustable, se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague PRETTY

€12,90

Stainless steel ring, gold or silver plated
Anneau fin effet strié et torsadé
Hauteur de la bague : 0.2 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

HANAE Ring

€15,90

Stainless steel ring, gold or silver plated
Anneau effet martelé composé d'une pampille bille
Diamètre de la bille : 0.4 cm
Hauteur de la bague : 0.6 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ACACIA

€15,90

Gold-plated stainless steel ring
Anneau fin texturé composé d'une fleur
Diamètre de la fleur : 1.2 cm
Ajustable, se resserre ou s’agrandit de la taille 52 à 58
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague MAKITA

€15,90

Gold-plated stainless steel ring
Anneau orné d'une perle en résine blanche et de deux perles dorées
Ajustable, se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague EMELINE

€15,90

Gold-plated stainless steel ring
Anneau effet martelé composé d'une pièce ovale ajourée et d'un carré
Hauteur de la bague : 0.9 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague RACHEL

€15,90

Gold-plated stainless steel ring
Anneau effet multi-rangs
Hauteur de la bague : 0.6 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

REKIA ring

€15,90

Gold-plated stainless steel ring
Anneau texturé orné de trois pierres naturelles
Ajustable, se resserre ou s’agrandit de la taille 50 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ORPHEA

€15,90

Gold-plated stainless steel ring
Anneau texturé orné de petites fleurs
Hauteur de la bague : 0.7 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague PERVENCHE

€15,90

Gold-plated stainless steel ring
Anneau fin texturé composé d'une fleur nacre
Diamètre de la fleur : 1 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague HESTIA

€15,90

Gold-plated stainless steel ring
Anneau effet couronne orné de trois perles en résine
Ajustable, se resserre ou s’agrandit de la taille 51 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague GRACE

€12,90

Ring in stainless steel gold
Anneau fin orné d'une pierre naturelle
Ajustable, la bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague EDWINA

€13,90

Ring in stainless steel gold
Anneau orné d'une pierre naturelle
Ajustable, la bague se resserre ou s’agrandit de la taille 52 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague SHINE

€13,90

Stainless steel ring, gold or silver plated
Anneau fin composé de trois pièces ovales effet martelé
Dimensions des pièces : 1.4 cm et 0.9 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague FANTINE

€12,90

Stainless steel ring, gold or silver plated
Anneau effet texturé au contour ondulé
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague SAPHIRA

€15,90

Ring in stainless steel gold OR silver
Anneau fin orné d'un oxyde de zirconium.
Ajustable, la bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

EVANE Ring

€12,90

Gold-plated stainless steel ring
Anneau fin texturé composée d'une fleur ornée d'oxyde de zirconium
Dimensions de la fleur : 0.4 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ELWINA

€13,90

Stainless steel ring, gold or silver plated
Anneau fin torsadé sur la partie supérieure et orné d'un petit oxyde de zirconium
Diamètre de l'oxyde de zirconium : 0.3 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague GAXINIA

€13,90

Stainless steel ring, gold or silver plated
Anneau fin texturé orné d'une fleur ajourée
Dimensions de la fleur : 1,4 cm x 1,7 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 51 à 58
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ORNELLA

€13,90

Bague en acier inoxydable doré OU argenté
Anneau effet deux rangs, l'un lisse en forme de V et l'autre effet torsadé
Ajustable, se resserre ou s’agrandit de la taille 52 à 58
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague TRECY

€13,90

Stainless steel ring, gold or silver plated
Anneau ondulé effet martelé
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Ring TATIANA

€16,90

Ring in stainless steel gold
Anneau texturé orné d'une pierre naturelle
Ajustable, la bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ADENORA

€15,90

Gold-plated stainless steel ring
Anneau fin texturé composé d'une pampille fleur et d'une perle d'eau douce
Ajustable, se resserre ou s’agrandit de la taille 52 à 66
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague INDIRA

€13,90

Gold-plated stainless steel ring
Anneau effet 3 rangs avec une lignée de petites billes
Hauteur de la bague : 0.6 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 51 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague MARGOTTE

€13,90

Gold-plated stainless steel ring
Anneau lisse orné de petites billes
Hauteur de la bague : 0.6 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 51 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

ABELIA Ring

€12,90

Stainless steel ring, gold or silver plated
Anneau fin effet torsadé orné d'un petit cristal rond
Hauteur de la bague : 0.4 cm
Epaisseur de l'anneau : 0.2 cm
Diamètre du cristal : 0.3 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 51 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague MARION

€15,90

Stainless steel ring, gold or silver plated
Anneau qui se croise sur le dessus
Hauteur de la bague : 1 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 58
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ANGELINA

€15,90

Gold-plated stainless steel ring
Anneau orné de perles en résine blanche
Ajustable, se resserre ou s’agrandit de la taille 51 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague NODO

€12,90

Gold-plated stainless steel ring
Anneau fin composé d'un soleil orné d'une perle en résine blanche
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ROMEA

€14,90

Gold-plated stainless steel ring
Anneau composé de lignes ondulées et texturées
Hauteur de la bague : 0,7 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 50 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague REINE

€12,90

Gold-plated stainless steel ring
Anneau fin composé de deux feuillages qui s'entrecroisent
Hauteur de la bague : 1 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 50 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ELORRI

€14,90

Gold-plated stainless steel ring
Anneau maille fantaisie effet deux rangs
Epaisseur de l'anneau : 0,8 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague ANOUSHKA

€14,90

Stainless steel ring, gold or silver plated
Anneau martelé effet deux rangs
Hauteur de la bague : 1 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague CONSTANCE

€12,90

Gold-plated stainless steel ring
Anneau fin texturé composé d'un cercle ajouré orné d'un oxyde de zirconium
Diamètre du cercle : 0,7 cm
Ajustable, se resserre ou s’agrandit de la taille 50 à 60
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bague DOUNIA

€12,90

Gold-plated stainless steel ring
Anneau composé d'un cercle ajouré et d'une pièce ronde
Diamètre du cercle : 1,3 cm
Diamètre de la pièce : 0,5 cm
Ajustable, cette bague se resserre ou s’agrandit de la taille 52 à 56
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm