Collier FLORIANE
Collier FLORIANE
Collier FLORIANE
Collier FLORIANE

Collier FLORIANE

€15,90 Save €-15,90

10 in stock
  • Gold-plated stainless steel necklace 
  • Composée d'une chaîne mixte et d'un pendant orné d'une étoile
  • Personnalisez la position du pendentif selon vos envies, la chaîne glisse au travers d'une perle vous permettant d'ajuster la longueur du pendant 
  • Longueur de la chaîne : 40 cm + 5 cm de chaînette d’extension avec un pendant de 5 cm 
  • Dimension de l'étoile : 0.7 cm 
  • Carabiner clasp 
  • Hypoallergenic, this jewel is water resistant and does not blacken. 

 

The rings

 

Method 1: Print the page.

  • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
  • Print this sheet at actual size or choose the 100% scale option. 

Before printing this page, make sure that the indicator below measures 3 cm on each side. 

  • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

 

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required : 

  • Paper strip or ribbon 
  • Pen
  • Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

 

The necklaces 

 

 

Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm

 

 

 

 

 

 

 

 

     

    You'll also like

    Quick overview
    Collier OLGA
    €17,90
    Quick overview
    Collier JACINTHE
    €17,90
    Quick overview
    Collier PIETRA
    €18,90

    Collier OLGA

    €17,90 Save €-17.90
    • Gold-plated stainless steel necklace 
    • Chaîne maille composée d'un pendentif effet ondulé orné d'une fleur en relief 
    • Diamètre de pendentif : 1.5 cm 
    • Longueur de la chaîne : 38 cm + 5 cm de chaînette d’extension 
    • Carabiner clasp 
    • Hypoallergenic, this jewel is water resistant and does not blacken. 

    The rings

     

    Method 1: Print the page.

    • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
    • Print this sheet at actual size or choose the 100% scale option. 

    Before printing this page, make sure that the indicator below measures 3 cm on each side. 

    • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

     

    Method 2: Measure your finger circumference

    For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

    Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

    Materials required : 

    • Paper strip or ribbon 
    • Pen
    • Rule

    The steps:

    1. On your strip of paper or tape, put a line for the starting point.
    2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
    3. Mark another line, where your measuring tool overlaps itself.
    4. Measure the distance between the two lines.
    5. 5. Refer to the equivalency table below to find out your finger size.

    There you have it, you have all the information you need to dress your finger with a nice ring! :-)

     

    The necklaces 

     

     

    Short: 40 cm
    Medium: 50 cm
    Short necklace: 60 cm
    Long necklace : 70 or 80 cm

     

     

     

     

     

     

     

     

       

      Collier OLGA
      Collier OLGA
      Collier OLGA
      Collier OLGA

      Collier JACINTHE

      €17,90 Save €-17.90
      • Gold-plated stainless steel necklace 
      • Chaîne maille bille composée d'une rangée de perles et d'un pendentif lune 
      • Dimensions du pendentif : 0.5 cm x 0.4 cm 
      • Longueur de la chaîne : 40 cm + 5 cm de chaînette d’extension 
      • Carabiner clasp 
      • Hypoallergenic, this jewel is water resistant and does not blacken. 

      The rings

       

      Method 1: Print the page.

      • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
      • Print this sheet at actual size or choose the 100% scale option. 

      Before printing this page, make sure that the indicator below measures 3 cm on each side. 

      • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

       

      Method 2: Measure your finger circumference

      For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

      Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

      Materials required : 

      • Paper strip or ribbon 
      • Pen
      • Rule

      The steps:

      1. On your strip of paper or tape, put a line for the starting point.
      2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
      3. Mark another line, where your measuring tool overlaps itself.
      4. Measure the distance between the two lines.
      5. 5. Refer to the equivalency table below to find out your finger size.

      There you have it, you have all the information you need to dress your finger with a nice ring! :-)

       

      The necklaces 

       

       

      Short: 40 cm
      Medium: 50 cm
      Short necklace: 60 cm
      Long necklace : 70 or 80 cm

       

       

       

       

       

       

       

       

         

        Collier JACINTHE
        Collier JACINTHE
        Collier JACINTHE
        Collier JACINTHE

        Collier PIETRA

        €18,90 Save €-18.90
        • Gold-plated stainless steel necklace 
        • Chaîne maille composée de trois pampilles 
        • Longueur de la chaîne : 39 cm + 5 cm de chaînette d’extension 
        • Carabiner clasp 
        • Hypoallergenic, this jewel is water resistant and does not blacken. 

        The rings

         

        Method 1: Print the page.

        • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
        • Print this sheet at actual size or choose the 100% scale option. 

        Before printing this page, make sure that the indicator below measures 3 cm on each side. 

        • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

         

        Method 2: Measure your finger circumference

        For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

        Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

        Materials required : 

        • Paper strip or ribbon 
        • Pen
        • Rule

        The steps:

        1. On your strip of paper or tape, put a line for the starting point.
        2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
        3. Mark another line, where your measuring tool overlaps itself.
        4. Measure the distance between the two lines.
        5. 5. Refer to the equivalency table below to find out your finger size.

        There you have it, you have all the information you need to dress your finger with a nice ring! :-)

         

        The necklaces 

         

         

        Short: 40 cm
        Medium: 50 cm
        Short necklace: 60 cm
        Long necklace : 70 or 80 cm

         

         

         

         

         

         

         

         

           

          Collier PIETRA
          Collier PIETRA
          Collier PIETRA
          Collier PIETRA
          Back to Pendants