Médaille rectangulaire au contour délicatement travaillé montée sur une chaîne maille bille
Finition mate (non brillante)
Dimensions de la médaille : 1.5 cm x 1.8 cm
Sélectionner la longueur de la chaîne
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
Indication : tous les bijoux gravés sont livrés dans un écrin
Personnalisation
Indiquer la gravure souhaitée et la police d'écriture dans l'espace prévu à cet effet ci-dessus.
Possibilité de graver sur 4 lignesmaximum(date, initiale, prénom, symbole, un mot...)
Indiquer votre souhait de gravure avec précision : majuscule, minuscule, ponctuation, espace, emplacement...
Une demande particulière ? Contactez-nous soit par mail : laboutiquedelulu@outlook.com soit par message sur Instagram
Le délai de réalisation pour les personnalisations est de 24h à 3 jours ouvrés
Les bijoux gravés ne sont ni repris, ni échangés
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
Composé d'une chaîne aux maillons plats et d'une chaîne ornée de pampilles alternant de petites médailles texturées et de perles en résine blanche
Un modèle élégant et lumineux mêlant différentes mailles et détails délicats pour un effet superposé raffiné
Longueur premier rang : 40 cm
Longueur deuxième rang : 42 cm
Adjustable size with 5 cm extension chain
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Collier DORIA acier
Regular price
€16,90
Save €-16.90
Stainless steel collar
Composé de perles rondes en résine ambrée translucide alternées avec de petites perles
Un modèle chaleureux et lumineux aux nuances ambrées idéal pour apporter une touche élégante et raffinée à vos tenues
Chain length: 40 cm + 5 cm extension chain
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Collier CALISTA acier
Regular price
€16,90
Save €-16.90
Stainless steel collar
Fine chaîne ornée de petits détails torsadés et de perles blanches, prolongée par un maillon ovale ajouré et un pendentif fleur serti d'oxydes de zirconium
Un modèle délicat et féminin, mêlant détails raffinés et d'une touche lumineuse pour sublimer votre décolleté
Chain length: 40 cm + 5 cm extension chain
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Collier ALOYS acier
Regular price
€16,90
Save €-16.90
Stainless steel collar
Fine chaîne maille ornée d'oxydes de zirconium sertis dans des montures en forme de losange et délicatement répartis le long de la chaîne
Un modèle fin, lumineux et raffiné, idéal pour apporter une touche d'éclat et d'élégance à votre décolleté
Longueur de la chaîne : 42 cm + 5 cm de chaînette d’extension
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.