Composé d'une médaille ovale au contour dentelé et d'une étoile en nacre montée sur une fine chaîne maille
Dimensions de la médaille : 2 cm x 1,5 cm
Dimension de l'étoile : 1 cm
Sélectionner la longueur de la chaîne
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
Indication : tous les bijoux gravés sont livrés dans un écrin
Personnalisation
Indiquer la gravure souhaitée et la police d'écriture dans l'espace prévu à cet effet ci-dessus.
Possibilité de graverdate, initiale, prénom, symbole, un mot...
Indiquer votre souhait de gravure avec précision : majuscule, minuscule, ponctuation, espace, emplacement...
Une demande particulière ? Contactez-nous soit par mail : laboutiquedelulu@outlook.com soit par message sur Instagram
Le délai de réalisation pour les personnalisations est de 24h à 3 jours ouvrés
Les bijoux gravés ne sont ni repris, ni échangés
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
Chaîne maille et pendant composés d'étoiles et d'oxydes de zirconium
Longueur de la chaîne : 42 cm + 5 cm de chaînette d’extension
Longueur du pendant : 10 cm
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Collier OMAYA
Regular price
€22,90
Save €-22,90
Gold-plated stainless steel necklace
Chaîne maille ornée de 9 pampilles
Longueur de la chaîne : 43 cm + 5 cm de chaînette d’extension
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
Indication : la perle d'eau douce étant naturelle, sa forme peut varier d’une perle à l’autre et ne peut pas être identique à celle présente sur la photo
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Collier KENDRA
Regular price
€26,90
Save €26,90
Collier effet trois rangs en acier inoxydable doré
Composé d'une chaîne maille, d'une chaîne maille perlée en résine d'époxy et d'une chaîne maille ornée de médailles ajourées motif fleur et d'une pastille noire
Longueur premier rang : 39 cm
Longueur deuxième rang : 42 cm
Longueur troisième rang : 46 cm
Adjustable size with 5 cm extension chain
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Collier ROSABELLE
Regular price
€15,90
Save €-15,90
Gold-plated stainless steel necklace
Chaîne maille ovale composée d'un pendentif orné du pierre noire
Longueur pendentif : 1.2 cm
Longueur de la chaîne : 39 cm + 5 cm de chaînette d’extension
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)