Collier DONKA
Collier DONKA
Collier DONKA
Collier DONKA

Collier DONKA

€14,90 Save €-14,90

13 in stock
  • Gold-plated stainless steel necklace 
  • Chaîne maille agrémentée de perles dorées et de pampilles et d'un pendentif en forme de fleur ornée d'oxydes de zirconium 
  • Longueur de la chaîne : 40 cm + 3 cm de chaînette d’extension 
  • Carabiner clasp 
  • Hypoallergenic, this jewel is water resistant and does not blacken. 

The rings

 

Method 1: Print the page.

  • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
  • Print this sheet at actual size or choose the 100% scale option. 

Before printing this page, make sure that the indicator below measures 3 cm on each side. 

  • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

 

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required : 

  • Paper strip or ribbon 
  • Pen
  • Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

 

The necklaces 

 

 

Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm

 

 

 

 

 

 

 

 

     

    You'll also like

    Quick overview
    Collier ROSANE
    €13,90
    Quick overview
    Collier SELMA
    €20,90
    Quick overview
    Collier ALICE
    €18,90

    Collier ROSANE

    €13,90 Save €-13,90
    • Gold-plated stainless steel necklace 
    • Chaîne maille composée d'un pendentif rond composé d'une fleur nacrée ornée d'un oxyde de zirconium
    • Diamètre de pendentif : 1.2 cm 
    • Longueur de la chaîne : 39 cm + 4 cm de chaînette d’extension 
    • Carabiner clasp 
    • Hypoallergenic, this jewel is water resistant and does not blacken. 

    The rings

     

    Method 1: Print the page.

    • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
    • Print this sheet at actual size or choose the 100% scale option. 

    Before printing this page, make sure that the indicator below measures 3 cm on each side. 

    • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

     

    Method 2: Measure your finger circumference

    For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

    Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

    Materials required : 

    • Paper strip or ribbon 
    • Pen
    • Rule

    The steps:

    1. On your strip of paper or tape, put a line for the starting point.
    2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
    3. Mark another line, where your measuring tool overlaps itself.
    4. Measure the distance between the two lines.
    5. 5. Refer to the equivalency table below to find out your finger size.

    There you have it, you have all the information you need to dress your finger with a nice ring! :-)

     

    The necklaces 

     

     

    Short: 40 cm
    Medium: 50 cm
    Short necklace: 60 cm
    Long necklace : 70 or 80 cm

     

     

     

     

     

     

     

     

       

      Collier ROSANE
      Collier ROSANE
      Collier ROSANE
      Collier ROSANE

      Collier SELMA

      €20,90 Save €-20,90
      • Gold-plated stainless steel necklace 
      • Chaîne maille bille agrémentée d'un pendentif fleur, d'une perle en résine blanche et d'un soleil orné d'un oxyde de zirconium 
      • Longueur de la chaîne : 39 cm + 5 cm de chaînette d’extension 
      • Carabiner clasp 
      • Hypoallergenic, this jewel is water resistant and does not blacken. 

      The rings

       

      Method 1: Print the page.

      • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
      • Print this sheet at actual size or choose the 100% scale option. 

      Before printing this page, make sure that the indicator below measures 3 cm on each side. 

      • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

       

      Method 2: Measure your finger circumference

      For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

      Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

      Materials required : 

      • Paper strip or ribbon 
      • Pen
      • Rule

      The steps:

      1. On your strip of paper or tape, put a line for the starting point.
      2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
      3. Mark another line, where your measuring tool overlaps itself.
      4. Measure the distance between the two lines.
      5. 5. Refer to the equivalency table below to find out your finger size.

      There you have it, you have all the information you need to dress your finger with a nice ring! :-)

       

      The necklaces 

       

       

      Short: 40 cm
      Medium: 50 cm
      Short necklace: 60 cm
      Long necklace : 70 or 80 cm

       

       

       

       

       

       

       

       

         

        Collier SELMA
        Collier SELMA
        Collier SELMA
        Collier SELMA

        Collier ALICE

        €18,90 Save €-18.90
        • Gold-plated stainless steel necklace 
        • Chaîne maille fantaisie agrémentée d'une rangée de perles naturelles et de perles dorées
        • Longueur de la chaîne : 38 cm + 5 cm de chaînette d’extension 
        • Carabiner clasp 
        • Hypoallergenic, this jewel is water resistant and does not blacken. 

        The rings

         

        Method 1: Print the page.

        • Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
        • Print this sheet at actual size or choose the 100% scale option. 

        Before printing this page, make sure that the indicator below measures 3 cm on each side. 

        • Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

         

        Method 2: Measure your finger circumference

        For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

        Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

        Materials required : 

        • Paper strip or ribbon 
        • Pen
        • Rule

        The steps:

        1. On your strip of paper or tape, put a line for the starting point.
        2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
        3. Mark another line, where your measuring tool overlaps itself.
        4. Measure the distance between the two lines.
        5. 5. Refer to the equivalency table below to find out your finger size.

        There you have it, you have all the information you need to dress your finger with a nice ring! :-)

         

        The necklaces 

         

         

        Short: 40 cm
        Medium: 50 cm
        Short necklace: 60 cm
        Long necklace : 70 or 80 cm

         

         

         

         

         

         

         

         

           

          Collier ALICE
          Collier ALICE
          Collier ALICE
          Collier ALICE
          Back to Our necklaces