Bracelet MARIETTE

Boucles d’oreilles ORIANE

€15,90

Gold-plated stainless steel flea earrings
Puce composée d'une petite fleur nacrée
Diamètre de la fleur : 1 cm
Butterfly clasp
Hypoallergenic, this jewel is water resistant and does not blacken.

—> Ces boucles d'oreilles sont vendues par paire

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bracelet YZEA

€15,90

Bracelet trois rangs en acier inoxydable doré
Composé d'une chaîne maille allongée ornée de pampilles rondes effet martelé, d'une chaîne maille bille et d'une chaîne maille ornée de perles blanches
Longueur du bracelet : 16 cm + 3 cm de chaînette d’extension
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bracelet XENIA

€14,90

Gold-plated stainless steel bracelet
Double cordon relié par un anneau effet martelé et orné de perles dorées
Longueur du bracelet : 16 cm + 3 cm de chaînette d’extension
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Collier NACERA

€20,90

Collier deux rangs en acier inoxydable doré
Chaînes mailles constituées de pendentifs ornés de perles en résine blanche
Longueur premier rang : 39 cm
Longueur deuxième rang : 41 cm
Adjustable size with 5 cm extension chain
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm