Hypoallergenic, this jewel is water resistant and does not blacken.
Indication : tous les bijoux gravés sont livrés dans un écrin
Personnalisation
Indiquer la gravure souhaitée et la police d'écriture dans l'espace prévu à cet effet ci-dessus.
Possibilité de graver sur 4 lignesmaximum(date, initiale, prénom, symbole, un mot...)
Indiquer votre souhait de gravure avec précision : majuscule, minuscule, ponctuation, espace, emplacement...
Une demande particulière ? Contactez-nous soit par mail : laboutiquedelulu@outlook.com soit par message sur Instagram
Le délai de réalisation pour les personnalisations est de 24h à 3 jours ouvrés
Les bijoux gravés ne sont ni repris, ni échangés
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
Chaîne maille composée de perles émaillées en forme d'œil
Longueur du bracelet : 21 cm + 3 cm de chaînette d’extension
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Piercing NALICIA
Regular price
€23,90
Save €-23,90
Piercing en TITANEvendu à l'unité en doré OU argenté
Composé d'une feuille ornée d'oxydes de zirconium
Dimensions de la feuille : 0,9 cm x 0,5 cm (au plus large)
Epaisseur de la tige : 0,12 cm
Longueur de la tige sans fermoir : 0,8 cm
Fermoir vis par la tête du bijou
Embout plat
Hypoallergenic, this jewel is water resistant and does not blacken.
—> Type de piercing adapté : Helix - Conch - Lobe - Tragus – Anti Helix - Medusa...). Il saura trouver sa place ailleurs sans aucun problème grâce à son embout plat
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Piercing PEGGY
Regular price
€23,90
Save €-23,90
Piercing en TITANEvendu à l'unité en doré OU argenté
Composé d'une fleur ornée d'oxydes de zirconium
Diamètre de la fleur : 0,8 cm
Epaisseur de la tige : 0,12 cm
Longueur de la tige sans fermoir : 0,8 cm
Fermoir vis par la tête du bijou
Embout plat
Hypoallergenic, this jewel is water resistant and does not blacken.
—> Type de piercing adapté : Helix - Conch - Lobe - Tragus – Anti Helix - Medusa...). Il saura trouver sa place ailleurs sans aucun problème grâce à son embout plat
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)
The necklaces
Short: 40 cm
Medium: 50 cm
Short necklace: 60 cm
Long necklace : 70 or 80 cm
Bracelet YELLESSA
Regular price
€21,90
Save €-21.90
Lot de 3 bracelets élastiques en acier inoxydable
Composé de perles colorées dont un bracelet est orné
d'une pampille ronde avec un motif fleur
Taille unique
Diamètre intérieur : environ 5 cm
Hypoallergenic, this jewel is water resistant and does not blacken.
The rings
Method 1: Print the page.
Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.
Before printing this page, make sure that the indicator below measures 3 cm on each side.
Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.
Method 2: Measure your finger circumference
For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.
Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.
Materials required :
Paper strip or ribbon
Pen
Rule
The steps:
1. On your strip of paper or tape, put a line for the starting point.
2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).
3. Mark another line, where your measuring tool overlaps itself.
4. Measure the distance between the two lines.
5. 5. Refer to the equivalency table below to find out your finger size.
There you have it, you have all the information you need to dress your finger with a nice ring! :-)