Bracelet YZEA

Bracelet ABIGAEL

€11,90

Gold-plated stainless steel bracelet
Chaîne maille composée d'un petit cœur
Longueur du bracelet : 16.5 cm + 3.5 cm de chaînette d’extension
Dimensions du cœur : 1 cm
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bracelet jonc CASSIOPEE

€12,90

Bracelet jonc en acier inoxydable doré OU argenté
Effet 4 anneaux composé d'un rang de motifs ajourés, d'un rang ondulé en zigzag et de deux rangs finement torsadés
Hauteur : 1.5 cm
Diamètre minimum : 5,5 cm
Diamètre maximum : 6,5 cm
Ajustable, se resserre ou s’agrandit
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bracelet CASSANDRA

€12,90

Gold-plated stainless steel bracelet
Chaîne maille composée de perles et d'une bille effet texturé
Longueur du bracelet : 16 cm + 3 cm de chaînette d’extension
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm

Bracelet LORANE

€15,90

Gold-plated stainless steel bracelet
Chaîne maille bille composée de plusieurs médaillons ronds ornés d'un oxyde de zirconium
Longueur du bracelet : 17 cm + 3 cm de chaînette d’extension
Carabiner clasp
Hypoallergenic, this jewel is water resistant and does not blacken.

The rings

Method 1: Print the page.

Get your favourite ring (preferably a simple ring) that you are used to wearing on the finger for which you want the size.
Print this sheet at actual size or choose the 100% scale option.

Before printing this page, make sure that the indicator below measures 3 cm on each side.

Place the ring on the different circles below. The black circle must be completely visible on the inside of your ring without you being able to see the outside part.

Method 2: Measure your finger circumference

For this method, we advise you to measure your finger at the end of the day, it will tend to be more swollen. If you are between two sizes, choose the larger of the two.

Remember that your two hands are not completely identical. For example, if you choose to measure your ring finger with your right hand, it is possible that the size of your ring finger does not correspond perfectly to the size of your left hand.

Materials required :

Paper strip or ribbon
Pen
Rule

The steps:

1. On your strip of paper or tape, put a line for the starting point.

2. Wrap the paper strip or the ribbon around your finger (Caution: Do not tighten too tightly, you have to think about the joint of the finger through which the ring will pass).

3. Mark another line, where your measuring tool overlaps itself.

4. Measure the distance between the two lines.

5. 5. Refer to the equivalency table below to find out your finger size.

There you have it, you have all the information you need to dress your finger with a nice ring! :-)

The necklaces

Short: 40 cm

Medium: 50 cm

Short necklace: 60 cm

Long necklace : 70 or 80 cm